PRODUCTS
Home » Products & Services » Maintenance Work
PLAST
Mfd IS: 1580
Packing 20Kg Drum
PLAST is a cold applied bituminous compound having multiple uses for stopping leaks Through cracks of concrete roofs, walls, porous masonry, J-Bolts of A.C./G.1 corrugated sheets, as sealants for plate, joints of wagons, coaches and buses. As caulking agent for crevices and vertical joints between steel plates, folded section, wood joints, pre-cast concrete claddings; blocks, underground tanks etc., and as adhesive for rain guards for rubber trees.
PRIMER – OB
Mfd to IS : 3384
Packing 20 Ltr Drum
A cold applied compatible primer prior to use of sealing compounds or any Bituminous treatment. This is a high penetration bitumen based primer. This primer Should be used on all porous or friable substrates, old or aged bitumen surfaces. If used as a general primer it Greatly improves adhesion and durability of subsequent use of Tiki Sealing compound or any bitumen waterproof coatings. BOP Primer (OB) is Easily applied and quick to dry.
BOND
(Proprietary Product)
A cold applied Bituminous adhesive for fixing of Bitumen felts.
PRIMER – WB
(Proprietary Product)
A Water-bound Bitumen emulsion used effective result to any Bituminous water proofing treatment.
BITUMEN
Grades : 85/25, 90/15 and 115/15
Mfd.to IS : 702
Basic Leak proof – Binder for Bitumen felts and cellular products and other industrial uses.
MASTIC
Mfd to IS : 9862

MASTIC is bitumen based anticorrosive odourless, tasteless and non-toxic ready mix brushable paint. It is also lead free and resistant to acid, alkali, water and chlorine. It is most efficient and economical protection against corrosion.

The effectiveness of an anticorrosive coating is directly related to its resistance against moisture. Initially many coatings are Water-Proof, but on ageing its ability as a protective coating is lost. Even the minute penetration of moisture is quite sufficient to encourage corrosion on the steel surface underneath. A good protective coating should have adhesive properties to the surface on which it is applied.

FLASH
(Proprietary product)
A dual purpose Bitumen based paint (Anticorrosive) with aluminum finish ideal for use after bituminous water proofing treatment (Reflects the heat).
EMULSIFIED BITUMEN
Type :RS, Mfd to IS : 8887
A cold applied ready to use Bitumen emulsion for repair of pat-holes, Tack Coat & Seal Coat.
FELT, T3,Gr.1
IS: 1322/ ISI Marked
Hessian based Bitumen Impregnated felt for waterproofing all type of Roofs.
GARD
IS: 1322/ ISI Marked
GARD is a high build two component epoxy coal tar coating giving very good toughness and water resistance. The product performs extremely well in total, partial, or intermittent immersion in salt or fresh water. It with stand corrosive conditions in soil immersion and also certain acidic and alkaline environments.
TRADING SERVICES

A reliable and efficient supplier is often the difference between success and failure in most projects.

BOP International specializes in trading in the following products :

CRUDE OIL
FUEL OILS
GASOLINE
JET FUEL
LNG
BULK AND DRUMMED BITUMEN
BASE OILS
RPO
DID YOU KNOW
The use of bitumen with natural asphalt or mixtures for waterproofing and as an adhesive dates back to the fourth millennium B.C., when the Sumerians used it in statuary, mortaring brick walls, waterproofing baths and drains, in stair treads, and for ship building.
Home | About Us | Products & Services | Contact Us
© 2015 BOP International. All rights reserved. Site by SDI